RR CUSTOMS
BAD BOYS PROFESSIONAL
TRAFFIC FILM REMOVER PRO

PROFESSIONAL TFR FOR NON-CONTACT PRE-WASHING OF VEHICLES

When washing a car, the most important thing is to remove as much dirt as possible before contact washing. This is where RR Customs Bad Boys Traffic Film Remover PRO comes in, a professional TFR (Traffic Film Remover) that effectively dissolves road film, grease, dust, and other operational dirt without the need for mechanical contact with the paintwork.

This highly concentrated product is designed for non-contact car washing, pre-washing vehicles before manual washing, and removing road film from the bodywork. Thanks to various dilution ratios, it can handle both normally soiled passenger cars and commercial vehicles, vans, or construction equipment.

If you are looking for a strong TFR cleaner, a car pre-wash product, or an effective road dirt remover, Bad Boys Traffic Film Remover PRO is among the most powerful products in its category.

WHY IS PRE-WASHING SO IMPORTANT?

Road film is a mixture of grease, dust, soot, asphalt residue, and other dirt that accumulates on the paintwork every day. This layer is often the most common cause of micro-scratches during manual washing.

Proper pre-washing helps to remove:

• common road film
• grease and operational deposits
• several days' worth of dust
• light organic dirt
• salt residue and road grime

The more dirt you remove non-contact, the safer the subsequent manual wash will be.

WHAT DOES BAD BOYS TRAFFIC FILM REMOVER PRO OFFER?

• Strong concentrate for non-contact vehicle washing
• Effectively dissolves road film and greasy dirt
• Ideal as a pre-wash before manual washing
• Various dilution ratios possible depending on the level of dirt
• High effectiveness even with significant dilution
• Suitable for passenger and commercial vehicles
• Professional fragrance-free formula
• Alkaline pH for maximum cleaning performance

HUGE YIELD THANKS TO HIGH CONCENTRATION

One of the biggest advantages of this product is its concentration. Bad Boys Traffic Film Remover PRO can be diluted up to a ratio of 1:100, which means a small amount of concentrate makes a large amount of working solution.

This means lower costs per wash and also the ability to adjust the strength of the product to specific contamination.

For light soiling, a higher dilution is sufficient; for heavily soiled vehicles, the concentration can be increased.

SAFE FOR CERAMICS AND WAXES?

Yes. When used correctly and diluted higher than 1:20, the product is safe for:

• ceramic paint protection
• hard waxes
• synthetic sealants
• most modern protective coatings

However, it is important to adhere to the recommended ratios. Too strong a concentration can gradually weaken protective layers or shorten their lifespan.

WHERE CAN YOU USE TRAFFIC FILM REMOVER PRO?

Thanks to its high effectiveness, it is suitable for:

• passenger cars
• SUVs and crossovers
• vans
• trucks
• work and construction machinery
• company fleets

It handles common road dirt and more demanding operating conditions without problems.

INSTRUCTIONS FOR USE

1. Dilute the product according to the level of contamination.
2. Apply to a cool surface out of direct sunlight.
3. Spray evenly onto the soiled parts of the vehicle.
4. Allow to act briefly.
5. Do not let the product dry.
6. Rinse thoroughly with high-pressure water.
7. Continue with manual washing using a quality car shampoo.

TIP FOR MAXIMUM EFFECT

For best results, use Traffic Film Remover PRO as the first step in washing. Subsequent application of active foam will further increase the effectiveness of the pre-wash and help remove maximum dirt before contact washing.