Koch Chemie HEAVY CUT H9.02

COARSE, HIGHLY ABRASIVE POLISHING PASTE WITHOUT SILICONE OIL

Heavy Cut H9.02 is a high-performance abrasive paste designed for fast and effective machine polishing of heavily weathered paintwork. Thanks to its extremely homogeneous abrasive grain, it provides a high degree of abrasion while maintaining good gloss. This coarse paste is ideal for removing deep scratches, paint mist, and sanding marks up to 1200 grit sandpaper.

The paste has minimal stickiness, low dust formation, and is suitable for all types of paints, including scratch-resistant ones.

PRODUCT ADVANTAGES

• Fast and effective removal of deep scratches
• High abrasiveness with good gloss level
• Minimal stickiness and low dust formation
• Suitable for both soft and hard paints
• Does not contain silicone oil

TECHNICAL PARAMETERS

• Abrasiveness: 9/10

• Gloss level: 6/10

AREAS OF USE

• Paints of passenger and commercial vehicles
• Motorcycles
• Other painted surfaces requiring coarse polishing

INSTRUCTIONS FOR USE

1. Wash and thoroughly dry the surface.
2. Shake the paste well before use.
3. Apply the paste to the polishing pad.
4. Polish with cross movements using:
   • Rotary polisher - lamb's wool pads (for 1200 – 2500 grit sanding marks).
   • Orbital polisher - Heavy Cut pads (for 2000 – 5000 grit sanding marks).
5. Work at medium speed and medium pressure.
6. For maximum gloss, finish polishing the surface with Micro Cut M3.02.

SAFETY INFORMATION

• Protect from frost and excessive heat.
• Do not use on hot surfaces.
• Test on a small, inconspicuous area before use.