Koch Chemie P6.02 One Cut & Finish - One-step polish (250 ml)

Koch Chemie ONE CUT & FINISH P6.02

ONE-STEP POLISHING PASTE WITH CARNAUBA WAX

One Cut & Finish P6.02 is an innovative one-step polishing paste with an improved formula, suitable for both soft and hard clear coats. It contains carnauba wax, which provides high gloss and protection in a single step. The paste is designed for machine polishing and effectively removes sanding marks, holograms, and scratches up to P2000 grit sandpaper.

Thanks to its homogeneous abrasive grains, it creates a brilliant, long-lasting glossy finish. One Cut & Finish P6.02 combines an optimal balance of abrasiveness and gloss, significantly speeding up vehicle polishing. It spreads and polishes easily, making the work simpler and delivering professional results.

PRODUCT BENEFITS

• Fast and effective one-step polishing
• Removes holograms, scratches, and sanding marks up to P2000 grit
• Contains carnauba wax for long-lasting gloss and protection
• Optimized balance of abrasive power and gloss
• Easy to spread and polish
• Contains non-volatile silicones

TECHNICAL PARAMETERS

• Abrasive level: 6/10

• Gloss level: 8/10

AREAS OF USE

• Car clear coats
• Commercial vehicles
• Motorcycles

INSTRUCTIONS FOR USE

1. Wash and thoroughly dry the surface.
2. Shake the paste well before use.
3. Test on a small area to verify compatibility with the clear coat.
4. Use a One Cut Pad polishing pad and an eccentric polisher with a 15 mm throw or a rotary polisher.
5. Apply 5 drops of polishing paste evenly onto the pad.
6. Bring the polisher to the surface and start polishing at the lowest speed.
7. Polish with medium pressure in a cross-hatch pattern.
8. After polishing is complete, remove paste residues with a microfiber cloth for a perfect result.

SAFETY INFORMATION

• Protect from frost and excessive heat.
• Do not use on hot surfaces.
• Always test the product's suitability on a small, inconspicuous area before use.