Koch Chemie P6.02 One Cut & Finish - One-step polish (1 L)

Koch Chemie ONE CUT & FINISH P6.02

ONE-STEP POLISHING PASTE WITH CARNAUBA WAX

One Cut & Finish P6.02 is an innovative one-step polishing paste with an improved formula, suitable for both soft and hard clear coats. It contains carnauba wax, which provides high gloss and protection in one step. The paste is designed for machine polishing and effectively removes sanding marks, holograms, and scratches up to P2000 grit sandpaper.

Thanks to its homogeneous abrasive grains, it creates a brilliant, long-lasting glossy surface. One Cut & Finish P6.02 combines an optimal balance of abrasiveness and gloss, significantly speeding up vehicle polishing. It spreads and polishes easily, making work easier and delivering professional results.

PRODUCT BENEFITS

• Fast and effective one-step polishing
• Removes holograms, scratches, and sanding marks up to P2000 grit
• Contains carnauba wax for long-lasting shine and protection
• Optimized balance of abrasive power and gloss
• Easy to spread and polish
• Contains non-volatile silicones

TECHNICAL PARAMETERS

• Abrasiveness: 6/10

• Gloss level: 8/10

AREAS OF USE

• Car clear coats
• Commercial vehicles
• Motorcycles

INSTRUCTIONS FOR USE

1. Wash and thoroughly dry the surface.
2. Shake the paste well before use.
3. Test on a small area to verify compatibility with the paint.
4. Use a One Cut Pad polishing pad and an eccentric polisher with a 15 mm throw or a rotary polisher.
5. Apply 5 drops of polishing paste evenly onto the pad.
6. Turn the polisher towards the surface and start polishing at the lowest RPMs.
7. Polish with medium pressure in a cross-hatch pattern.
8. After polishing, remove any paste residue with a microfiber cloth for a perfect finish.

SAFETY INFORMATION

• Protect from frost and excessive heat.
• Do not use on hot surfaces.
• Always test the product on a small, inconspicuous area before use.